www.schaerer.com Basic operation
PASCA_TOUCHIT_EN
V02 | 07.2013
20
Chip cards
The various chip cards have different access rights and make different functions available. The
main functions of the cards are the following:
• Following entry of a PIN, the SERVICE card enables full access to the machine control
software, configuration parameters and system parameters.
• The CHEF card makes it possible to read and partially clear counters and permits limited
access to the product configuration (recipes). The self mode can be switched on and off.
• The PROGRAM card is used to configure a payment system and the MONEY card.
• The MONEY cards (A+B) work like credit cards with the possibility of a discount.
• The MASTER card deactivates the payment system to enable free vending.
• The CUP card makes it possible to read existing counters.
• The ROASTER card makes it possible to read and partially clear counters and permits lim-
ited access to the product configuration (recipes).
The following chip cards are described in detail below:
• CHEF card
•PROGRAM card
• MONEY A Card
• MONEY B Card
•MASTER card
• CUP card
• ROASTER card
CHEF card
CHEF card 063930/28:
• With article number 063930 (see the first 6 digits).
• Chip version SLE28 (see the last two digits).
• No PIN entry required.
• The customer number is checked.
See "Basic operation" - "SERVICE card" - "Gaining access with the SERVICE card" for addi-
tional information on using the SERVICE card.
See "Service technician menu" - "Accounting" - "Payment systems setup" for activating a pay-
ment system.
See "Service technician menu" - "Accounting" - "MONEY card settings" for the settings of the
MONEY cards.
See "Service technician menu" - "Accounting" - "Accounting system setup" for the settings of
the payment system.
To Next Page
Loading...
