Schaerer Coffee Art TouchIT - TouchIT configuration

PASCA_TOUCHIT_EN
V02 | 07.2013
45
www.schaerer.comConfiguration
2) Language Changes the display language. All provided
languages
–
3) Logo (in "Standby" mode) Selection from the images stored in the sy-
stem.
All stored ima-
ges
See "Touch screen imag-
es".
4) Cleaning PIN Activates the request for a PIN before
cleaning.
► Enter the PIN number in the field.
 PIN request before cleaning.
► Entry field contains (0000).
 No PIN request before cleaning.
1-9999 (0000) The PIN request is
deactivated.
5) DECAF button visible A preselection field [DECAF] appears on the
touch screen to enter ground coffee in the
center manual insert or to preselect a defined
grinder for decaffeinated coffee beans.
On/off If "Manual filling" is
selected for the DECAF
source in the "General
Parameters" and the "18
DECAF inlet sensor" sy-
stem parameter is activa-
ted, the [Decaf] field is not
needed.
6) 2x button visible A preselection field [2x] appears on the touch
screen for doubling the dispensing quantity
of the beverage selected next.
On/off The "Dispensing mode" in
the product configurations
must be set to "Double
product".
7) Service button visible The [Service] menu field at the bottom left of
the touch screen is switched on or off.
On/off This field has a quick
menu function in standby
mode.
See "Basic operation"-
"Switching on".
8) Power button visible The [Power on] field at the bottom right of the
touch screen is switched on or off.
On/off Switches the machine on
or off (standby).
9) Default tab timeout Sets the time that elapses before a defined
standard tab level (A) is displayed on the
touch screen.
► Make the time setting.
 The "10 Default tab" parameter ap-
pears.
0-999 sec This function is deactiva-
ted when set to "0 sec".
Parameters: TouchIT configuration
Display text Description Setting range Notes