www.schaerer.com Configuration
PASCA_TOUCHIT_EN
V02 | 07.2013
70
0) Parameter [ON/OFF] field The error messages listed below can be
switched on for the external alarm output us-
ing the [ON/OFF] field.
• 0) Water flow error
• 1) Over current brewer motor
• 2) Brew unit timeout
• 3) Brew motor current
• 4) Grinder left blocked
• 5) Grinder right blocked
• 6) Grinder current
• 7) Coffee sensor defect
• 8) Hot water sensor defect
• 9) Steam sensor defect
• 10) Sensor steamwand defect
• 11) Booster sensor defect
• 12) Timeout coffee heater
• 13) Hot water heater timeout
• 14) Steam heater timeout
• 15) Over temperature coffee
• 16) Over temperature hot water
• 17) Over temperature steam
• 18) Timeout steam supply
• 19) Steam temperature too low
• 20) Empty grounds container (this mes-
sage appears five products before the set
quantity is reached).
• 21) Empty grounds container (this mes-
sage appears when the set quantity is
reached).
• 22) Grounds container missing
• 23) Grinder left no beans
• 24) Grinder right no beans
• 25) Start cleaning
• 26) Filter change
• 27) Service request
• 28) Heating coffee water
• 29) Heating water
• 30) Heating steam
• 31) Front panel missing
• 32) Water tank empty
• 33) Waste water tank full
• 34) Initialising
• 35) Machine drained
• 36) Service button error
• 37) Product button error
• 38) Milk not available
• 39) Machine not ready
• 40) Error during cleaning
• 41) Milk is empty
On/off -
Parameters: Alarm output
Display text Description Setting range Notes
To Next Page