EasyManua.ls Logo

Schaerer Coffee Art TouchIT - Output test

Schaerer Coffee Art TouchIT
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.schaerer.com System
PASCA_TOUCHIT_EN
V02 | 07.2013
98
31) Center milk communication Enables cleaning in the second machine of
the "Center Milk" milk system.
ON:
Cleaning is enabled in the second
machine.
OFF:
No communication between the ma-
chines.
On/off Only with the appropriate
machine equipment and
activated system parame-
ter.
32) V19 steam cup heater Actuation of the cup warmer valve.
ON:
The valve to the cup warmer opens
and steam is made available.
OFF:
The valve is closed and steam is not
made available.
On/off Only with the appropriate
machine equipment and
activated system parame-
ter.
To actually output steam,
an additional mechanical
steam valve on the cup
warmer must be actuated.
33) V18 changeover Changes the outlet to the "swan neck".
ON:
The valve is positioned to change the
outlet to the "swan neck".
OFF:
The valve is positioned for the stand-
ard beverage outlet.
On/off Only with the appropriate
machine equipment and
activated system parame-
ter.
34) Rel7 relay twinmilk Switches the additional relay for the "Twin
Milk" milk system.
ON:
The squeeze valve is switched on.
OFF:
The squeeze valve is switched off.
On/off Only with the appropriate
machine equipment and
activated system parame-
ter.
35) PWM steam level Output test of the level monitoring for the
steam boiler.
ON:
A "Level too low" output signal is sim-
ulated by the level monitoring.
OFF:
No output signal.
On/off -
36) M8/M14 PWM milkpump Pump speed regulation of the milk pump.
Enter the pump speed.
Confirm the entry.
The pump runs with the set speed.
Change the set value back to "0".
The pump is switched off.
0-100 "0"= switched off.
"100"=
max. Geschwindigkeit.
Parameters: Output test
Display text Description Setting range Notes

Table of Contents

Related product manuals