54
3. Select a PIN pairing method.
Each connection: It is required to provide PIN every time when a device connects
to the receiver.
First connection: It is required to provide PIN the first time when a device connects
to the receiver.
4. Select a PIN length: 4-digit and 8-digit.
4-digit: The receiver will generate a 4-digit PIN. By default, the 4-digit PIN is used.
8-digit: The receiver will generate an 8-digit PIN.
5. Select a PIN generation method.
When the Force PIN Pairing feature is enabled, the system provides two PIN
generation methods: Static and Random.
Static: When Static is selected, users can define a PIN flexibly. The static PIN will
not be displayed on the connected display.
If 8-digit is selected for the PIN length, users can define the first seven (7) digits,
and then the system generates an 8-digit PIN with that seven digits included.
Enter seven (7) digits in the Static PIN box, and the system generates the eighth
(8th) digit.
Random: A PIN code is generated randomly by ScreenBeam and displayed on the
To Next Page
Loading...
