SEEDMASTER 2023
65
14. Turn the master switch on by pressing the foot switch.
15. Touch the Start button.
NOTE: Ensure the system pressure is engaged so that the metering drive motors have
hydraulic pressure. Also, note that the meters will begin to expel product after touching the
start button.
16. A blue bar will display during the calibration. This indicates the progress of the calibration.
When the calibration time is expired, the meter will shut off automatically.
NOTE: If the product needs to be shut off at any time during the calibration progress simply
press the master foot switch to stop the meter from spinning. This will compete the catch
process and advance the calibration process to the next screen. Please cancel the
calibration process and start over if catch sample is inaccurate or light.
To Next Page
Loading...