Shimadzu LC-40D XR CL User Manual

Option Part No. Features
RINSING PUMP XR 228-39625-42
The rinsing pump kit is intended for
continuously rinsing the back part of the plunger
seal with rinsing solution. The rinsing volume
can be selected.
Tool Kit 228-57647-43
Kit containing the necessary tools for
preparation, inspection, and maintenance.
SUS Pipe (0.3´600)
228-53184-54
Plumbing for the pump outlet. ID 0.3 mm
´600 mm, pre-bent
SUS Pipe HP (0.3´1,000)
228-53184-96
Plumbing for the pump outlet. ID 0.3 mm
´1000 mm
Plunger Seal GFP 228-52711-94
The maximum available pressure is 44MPa.
When using a non-polar organic solvent such as
hexane or a solvent of alkyl sulfonic acid with
TFA, use the standard plunger seal.
SUCTION FILTER ASSY 228-61905-49
Suction filter with tube and fittings for the low
pressure gradient kit or the degassing unit.
n Optional Parts for LC-40D X3 CL
Option
Part No. Features
MAINTENANCE
KIT,LC-40D X3
228-53265-45
A set of consumable parts and plumbing parts
for LC-40D X3 CL.
"Maintenance Kit for LC-40D X3 CL (Parts
No. 228-53265-45)" P.133
n Optional Parts for LC-40D XR CL
Option
Part No. Features
MAINTENANCE KIT,
LC-40D XR
228-45593-49
A set of consumable parts and plumbing parts.
"Maintenance Kit for LC-40D XR CL (Parts
No. 228-45593-49)" P.133
4
LC-40D X3 CL LC-40D XR CL
1 Overview

Shimadzu LC-40D XR CL Specifications

General

Brand	Shimadzu
Model	LC-40D XR CL
Category	Laboratory Equipment
Language	English