Chapter 2 Operating Instructions
Flexi Classic Gateways
10 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8011834/YT28/2016-03-15
Subject to change without notice
On safety
The operating instructions must be made available to the operator of the machine
where a Flexi Classic safety controller is used. The machine operator is to be instructed
in the use of the device by specialist personnel and must be instructed to read the ope-
rating instructions.
The Flexi Classic system complies, as per the “radiated emissions” generic standard, with
the requirements of class A (industrial applications). the Flexi Classic system is therefore
only suitable for use in an industrial environment.
2.3 Environmental protection
The Flexi Classic gateways are designed for minimum impact on the environment, they
consume only a minimum of energy and resources.
At work, always act in an environmentally responsible manner.
2.3.1 Disposal
Unusable or irreparable devices should always be disposed as per the applicable national
regulations on waste disposal (e.g. European waste code 16 02 14).
We would be pleased to be of assistance to you on the disposal of these devices. Contact
us.
2.3.2 Separation of materials
Only qualified safety personnel are allowed to separate materials!
Caution is required when dismantling devices. There is a risk of injuries.
Before you send the devices for appropriate recycling, it is necessary to separate the diffe-
rent materials in the Flexi Classic gateways.
Separate the housing from the rest of the parts (in particular the circuit board).
Send the separated parts for recycling as appropriate (see Tab. 1).
Components Disposal
Product
Housing, circuit boards, cables,
connectors and electrical connecting
pieces
Electronic recycling
Packaging
Cardboard, paper
Paper/cardboard recycling
WARNING
WARNING
by components
To Next Page
Loading...
Need help?
General
