SICK Flexi Classic User Manual

Operating Instructions Chapter 9
Flexi Classic Gateways
8011834/YT28/2016-03-15 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
115
Subject to change without notice
EtherNet/IP Gateway
9.8 Resetting to factory settings
T
he UE410-EN can be reset to the factory settings as follows:

Open a web browser on a PC in the same network and go to the address of the
UE410FEN. The following web page is displayed:
 Click the reboot button. The following web page is displayed:
 Activate Set configuration for PLC Interface and Data Sets to factory default settings.
 Click the button Yes: Reboot. The following web page is displayed:
The UE410-EN is reset to the factory settings. The web server of the UE410-EN is called up
again automatically.

SICK Flexi Classic Specifications

General

Brand	SICK
Model	Flexi Classic
Category	Controller
Language	English