Chapter 10 Operating Instructions
Flexi Classic Gateways
138 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8011834/YT28/2016-03-15
Subject to change without notice
PROFINET IO Gateway
10.5.2 Status of the Flexi system
Via web server
Open a web browser on a PC in the same network and go to the address of the
UE410FEN. The gateway’s homepage will be displayed.
Click on Flexi System Status. The following web page is displayed:
The page shows diagnostics for one Flexi Classic module at a time. The initial load of
the page shows diagnostics of module 1 in the system. Module Type indicates the type
of the module.
Click on the Next button to display the diagnostics for the module to the right and so on.
Click on the Prev button to display the diagnostics for the module to the left and so on.
If the gateway IP address is unkown to the user or the IP address of the user’s PC shall not
be changed, alternatively the software tool Flexi Classic IP-Link can be used to find the
gateway.
Note
To Next Page
Loading...
Need help?
General
