SICK Flexi Classic User Manual

Chapter 9 Operating Instructions
Flexi Classic Gateways
104 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8011834/YT28/2016-03-15
Subject to change without notice
EtherNet/IP Gateway
Entry Description
Unsupported CIP
Request Class Errors
Displays the number of unsupported CIP request class errors.
These errors occur when a message with an invalid class is
sent to the UE410-EN module.
Unsupported CIP
Request Attribute Errors
Displays the number of unsupported CIP request attribute
errors. These errors occur when a message with an invalid
attribute is sent to the UE410-EN module.
Improper Configuration
Errors
Number of messages errors that occur when a PLC sends a
message requiring a configuration other than the current
settings. Likely causes are:
 Incorrect Receive or Transmit mode settings
 Requested Data Set not enabled
Invalid Message Data
Errors
Displays the number of invalid message data errors. These
errors occur when the UE410-EN module receives a message
that cannot be performed due to invalid data.
System Resource Errors Displays the number of errors that occurred due to
overflowing the internal transmit queues (S-Bus+ specific).
First Error Description Error description for the first error detected
Last Error Description Error description for the last error detected

SICK Flexi Classic Specifications

General

Brand	SICK
Model	Flexi Classic
Category	Controller
Language	English