Operating Instructions Chapter 8
Flexi Classic Gateways
8011834/YT28/2016-03-15 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
75
Subject to change without notice
Ethernet TCP/IP Gateway
Click Socket N to edit any of the four socket interfaces. The following web page is
displayed:
Enter the Listen Port number that is more appropriate to the user application.
Port 9000 and port 9001 are reserved and shall not be configured.
Set Connect To Mode to Never if the application shall connect to the UE410-EN.
Activate Save in Flash and click Submit to save the selection or continue configuration.
When a reserved port has been entered as Listen Port, a special web page will be dis-
played upon Submit. The following page will be displayed:
Select Use default Listen Port of N to reset the Listen Port configuration to the valid
default port number of the socket. If this checkbox remains unchecked, the invalid port
number will remain entered when returning back to the configuration page and shall
still be changed to another value.
Click Submit to return to the Edit Socket N Configuration web page.
Note
To Next Page
Loading...
Need help?
General
