SICK Flexi Soft User Manual

Figure 68: Maximum switching voltage with direct current, relay modules UE410-2RO/
UE410-4R
O
1
DC voltage [V DC]
2
Direct current [A]
3
Resistive load
Figure 69: Electrical endurance of relay modules UE410-2RO/UE410-4RO
1
Switching operations
2
Switching current [A]
3
250 V AC resistive load with 1 N/O contact
Table 185: Output circuit (Y14, Y24) of the UE410-2RO/UE410-4RO
Minimum Typical Maximum
Type of output Normally open contact on internal 24V DC, positively
guided
, current limited
Number of normally open contacts Y14/24
UE410-2RO 1
UE410-4RO 2
Output voltage 16V DC +24VDC 30V DC
TECHNICAL DATA 12
8012478/1IG6/2023-02-24 | SICK O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller
169
Subject to change without notice

SICK Flexi Soft Specifications

General

Safety Integrity Level (SIL)	SIL3
Performance Level (PL)	PL e
Programming	Flexi Soft Designer
Power Supply	24 V DC
Safety Protocols	PROFIsafe, CIP Safety
Protection Class	IP20
Number of I/Os	Configurable
Operating Voltage	24 V DC
Power Consumption	Depends on configuration
Dimensions (W x H x D)	Varies depending on the module configuration
Weight	Varies depending on the module configuration
Number of Safety Inputs	Configurable
Number of Safety Outputs	Configurable
Safety Standard	IEC 61508, IEC 62061, ISO 13849
Operating Temperature	0°C to +55°C
Response Time	< 10 ms (typical)
Storage Temperature Range	-25°C to +70°C
Relative Humidity	15 % ... 95 %, non-condensing