SICK Flexi Soft User Manual

C3 HD-D-Sub female connector
T
able 33: 00C3 HD-D-Sub female connector, FX3-EBX3, for connection to FX3-MOCx
Female connector PIN Designation
1 ENC1_A+
2 ENC1_A–
3 ENC1_24V
4 ENC2_A+
5 ENC2_A–
6 ENC1_B+
7 ENC1_B–
8 ENC_0V
9 ENC2_B+
10 ENC2_B–
11 ENC1_C+
12 ENC1_C–
13 ENC2_24V
14 ENC2_C+
15 ENC2_C–
C4 D-Sub female connector
T
he EBX3 connection unit also has a 9-pin D-Sub female connector for connecting a second FX3-EBX3 encoder/
motor feedback connection unit.
NOTE
•
T
he connection of a dual encoder/motor feedback connection unit FX3-EBX4 is not permitted here.
•
A maximum of two encoder/motor feedback connection units are FX3-EBX3 are allowed per FX3 MOCx
module.
Table 34: C4 D-Sub female connector, FX3-EBX3
Female connector PIN Designation
1 ENC_A+
2 ENC_B+
3 ENC_C+
4 Reserved (ID identifier in combination with volt‐
a
ge supply)
5 ENC_24V
6 ENC_A-
7 ENC_B-
8 ENC_C-
9 ENC_0V
5 ELECTRICAL INSTALLATION
66
O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller 8012478/1IG6/2023-02-24 | SICK
Subject to change without notice

SICK Flexi Soft Specifications

General

Safety Integrity Level (SIL)	SIL3
Performance Level (PL)	PL e
Programming	Flexi Soft Designer
Power Supply	24 V DC
Safety Protocols	PROFIsafe, CIP Safety
Protection Class	IP20
Number of I/Os	Configurable
Operating Voltage	24 V DC
Power Consumption	Depends on configuration
Dimensions (W x H x D)	Varies depending on the module configuration
Weight	Varies depending on the module configuration
Number of Safety Inputs	Configurable
Number of Safety Outputs	Configurable
Safety Standard	IEC 61508, IEC 62061, ISO 13849
Operating Temperature	0°C to +55°C
Response Time	< 10 ms (typical)
Storage Temperature Range	-25°C to +70°C
Relative Humidity	15 % ... 95 %, non-condensing