Maintenance and meter exchange
FLOWSIC500 · Operating Instructions · 8025733/1GMJ/V4-2/2022-07 · © SICK Engineering GmbH 121
Subject to change without notice
12 Check the sealing surfaces on the
adapter (marked green):
– When the sealing surfaces are
contaminated, clean carefully.
– Ensure that the sealing surfaces
are undamaged. They have to be
free of scratches or grooves.
WARNING: Hazard of leaks
There is a risk of the installation becoming leaky when the sealing surfaces of
the adapter are damaged. Operation in leaky condition is not allowed and
potentially dangerous.
▸
In this case, the adapter has to be exchanged.
▸
Please contact your local SICK Customer Service.
To Next Page
Loading...
