SICK FLOWSIC500 User Manual

Commissioning
FLOWSIC500 · Operating Instructions · 8025733/1GMJ/V4-2/2022-07 · © SICK Engineering GmbH 69
Subject to change without notice
4.2.2 Setting the date and time
Date and time must be set after the power supply has been connected. The FLOWSIC500
displays error E-3007 (“Time invalid”) until the time has been set.
1 Log on as “Authorized user” (→ p. 97, §5.2.7).
2 Switch to the “System settings” submenu in the FLOWSIC500 menu.
3 Call up “Date”.
4 Press ENTER to start the edit mode.
The cursor now blinks under the first position of the date.
5 Use the arrow buttons to increment or decrement the selected position by 1 until the
correct digit is shown.
6 Confirm with ENTER.
The cursor now blinks under the second position of the date.
7 Repeat for the remaining positions of the date.
The date is saved when you confirm the last position with ENTER.
8 Switch to “Time”.
9 Use the arrow buttons to increment or decrement the first position of the time by 1 until
the correct digit is shown.
10 Confirm with ENTER.
11 Repeat for the remaining positions of the time.
The time is saved when you confirm the last position with ENTER.
4.2.3 Configuring volume conversion (device option)
4.2.3.1 Setting fixed values
The fixed values must be set to the average measurement conditions of pressure and
temperature:
1 Log on as “Authorized user” (→ p. 97, §5.2.7).
2 Start the configuration mode (→ p. 97).
3 In the FLOWSIC500 menu, switch to submenu “Pressure parameters” or “Temperature
parameters”
4 Select the view “p Fixed value” or “T Fixed value”.
5 Press ENTER to start the edit mode.
The cursor now blinks under the first position of the parameter.
6 Use the arrow buttons to increment or decrement the selected position by 1 until the
correct digit is shown.
7 Confirm with ENTER.
The cursor now blinks under the second position of the parameter.
8 Repeat for all remaining positions of the parameter.
The fixed value is saved when you confirm the last position with ENTER.
Detailed information on operating using the display and on menu navigation
→ p. 80, §5.2.
● The time zone function adapts the time to the new time zone.
If you want to change date and time as well as the time zone, change the
time zone first.
● Date and time can be changed without starting configuration mode.

SICK FLOWSIC500 Specifications

General

Brand	SICK
Model	FLOWSIC500
Category	Measuring Instruments
Language	English