78 FLOWSIC500 · Operating Instructions · 8025733/1GMJ/V4-2/2022-07 · © SICK Engineering GmbH
Commissioning
Subject to change without notice
4.3.5 Function check after commissioning
▸
Check the device status.
Table 22 Signaling the device status in FLOWgate
TM
▸
Click on the symbol in the Status bar when warnings or errors exist.
The current Status overview opens and shows details and information on how to
proceed.
Status Description
Normal operation, neither warnings nor errors exist
Device status warning: At least one warning is pending in the device, the
measured value is still valid.
Device status error: At least one error is pending in the device, the
measured value is invalid.
To Next Page
Loading...
