Maintenance and meter exchange
FLOWSIC500 · Operating Instructions · 8025733/1GMJ/V4-2/2022-07 · © SICK Engineering GmbH 131
Subject to change without notice
7.4.12 Checking the function of the new gas flow meter
▸
Check on the display if there are any malfunctions or warnings:
▸
When malfunctions or warnings exist, clear the cause (→ p. 101, §6).
▸
Alternatively, check the device status with the FLOWgate
TM
operating software, → p. 78,
§4.3.5.
▸
Create a diagnostics session and file with the device documentation, → p. 105, §6.4 .
7.4.13 Securing metrologically
▸
Gas flow meter and adapter can be secured at the joint by a user seal (adhesive label)
(→ p. 34, §2.9).
▸
When the parameter locking switch has been opened during the meter exchange,
secure the parameter locking switch anew metrologically (→ Fig. 9, p. 35).
Device status: Malfunction The device has an error, the measured value is invalid.
Device status: Warning The device has a warning, the measured value is still valid.
To Next Page
Loading...
