SICK FLOWSIC500 User Manual

14 FLOWSIC500 · Operating Instructions · 8025733/1GMJ/V4-2/2022-07 · © SICK Engineering GmbH
Important information
Subject to change without notice
Danger identification on device
Special local conditions
▸ Follow all local laws, regulations and company-internal operating directives applicable at
the installation location.
Retention of documents
These Operating Instructions must be
▸ Kept available for reference
▸ Passed on to new owners.
1.5 Additional documentation/information
Some parameter settings, device components and characteristics depend on the individual
device configuration. This individual device configuration is described in the device
documentation delivered with the device:
● Conformity Declaration
● Material certificate
● Inspection certificate
– Device configuration sheet
– Encoder test protocol (optional)
– Low pressure calibration test protocol (optional)
– Labels according to Pressure Equipment Directive 2014/68/EC, Annex 1 Part 3.3
● Printed Parameter report
● Product CD:
– Operating Instructions
– FLOWgate
TM
operating software
– FLOWgate
TM
Software Manual
– Certificates
– Instructions/information for accessories
– Calibration instructions
– Modbus specification
WARNING: Danger identification on device
The following symbol draws attention to important dangers directly on the
device:
▸ Consult the Operating Instructions in all cases where the symbol is
attached to the device or shown on the display.

SICK FLOWSIC500 Specifications

General

Brand	SICK
Model	FLOWSIC500
Category	Measuring Instruments
Language	English