58 FLOWSIC500 · Operating Instructions · 8025733/1GMJ/V4-2/2022-07 · © SICK Engineering GmbH
Installation
Subject to change without notice
3.4.10.1 Connecting the batteries to supply the FLOWSIC500
1 Open the electronics cover (→ p. 48, §3.4.3).
2 Insert the battery packs (Part. No. 2064018) as shown and connect to connections
BAT1 and BAT2 in the terminal compartment.
The FLOWSIC500 is initialized.
Fig. 25 Connected battery packs
3 Close the electronics cover again.
4 Set the date and time (→ p. 68, §4.2).
To Next Page
Loading...
