49
8024638/AE00/V1-0/2019-09| SICK S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
FUNCTIONAL TEST 4
4.5.2 MODBUS simulation
1 Select Parameterization -> Formulas -> Formula 130 Modbus Simulation.
Fixed values can be specified for the measured values. These are available in the Modbus
registers and can be searched for by the customer.
Proceed as follows to change the register sequence in the data transfer:
1 Select Parameterization -> Modbus.
2 Select Register swap.
3 Select the register sequence.
To Next Page
Loading...
