Call Detail Report Manager
103
Step by Step
• Type of Call (I):
1 = Incoming call
2 = Outgoing call
5 = Transferred incoming call
6 = Transferred outgoing call
7 = 3-way conference with incoming call
8 = 3-way conference with outgoing call
* = Incoming call, not yet answered
• Impulses (Call fees) with a TME1 Module installed.
• Project Code (Account Code)
Example
When a call is transferred, a new call detail report is
issued. The hold time at the external line is accounted
for by the extension that transferred the call.
Ticket Cost Code
External calls can be assigned Cost Codes which
provide more control over telephony costs (see
Functions used during Calls - Cost Code, in the Manual
do Usuário). This information will appear in the billing
ticket.
Required:Programming Mode must be active (*95
31994).
Enter the code for programming.
or Activate/Deactivate sending Cost Code for call detail
report:
= To activate
= To deactivate (default)
Initial state for Programming Mode.
Date Time Ln Ext WCOS Ring Duration Number I Callfees Acc. Code
22.11.99 14:00:00 01 21 00:14 00:01:34 2222222 1
0 9 5
*
#
*
#
To Next Page
Loading...
