Siemens HiPath 1130 - Music Source Extension; External Music Source - Extension Assignment

General Programming
79
Step by Step
Press this key.
Initial state for Programming Mode.
Music Source Extension
This is an extension to which a music source is connect-
ed.
No extensions are configured as a default.
Enter the code for programming.
or Select Group 1 or 2.
Enter the extension number (e.g., 11/101).
Press this key.
Initial state for Programming Mode.
Deleting an Extension
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or Select Group 1 or 2.
Deletes the music source extension.
Press this key.
Initial state for Programming Mode.
External Music Source - Extension Assign-
ment
With this feature Music On Hold can be played from
audio equipment connected to an extension slot.
By default, no extension is configured.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number (e.g., 11/101).
#
8 90
1 2
#
8 90
1 2
*
#
The extension specified is deactivated when the
External Music Source - Extension Assignment
Option is configured.
0 6 4