Step by Step
Programming an Extension
68
Collect Call Barring by Extension
When Collect Call Barring is activated, all collect calls for
the specified extension are automatically rejected by
the system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number (e.g., 11/101).
or Activate/Deactivate Collect Call Barring:
= To activate
= To deactivate (default)
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
Only one UCD Subscriber Group may be config-
ured for Voice Mail. This group’s extensions are
connected to the server via the HiPath 1100 a/b
pair.
See Voice Mail Protocol Æ page 138.
9 3
*
#
*
#
#
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.
To Next Page
Loading...
