Siemens HiPath 1130 - Symmetric Call; Absence of ACK Setup for External ISDN Line; Notify

Programming a Digital Trunk
119
Step by Step
Symmetric Call
This setting configures the system for symmetric calls.
Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or Activate/Deactivate Symmetric Mode:
= To activate (default)
= To deactivate
Initial state for Programming Mode.
Absence of ACK Setup for external ISDN Line
Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or Activate/Deactivate ACK setup:
= To activate
= To deactivate (default)
Initial state for Programming Mode.
Notify
Check with your local carrier to know which operating
mode should be configured for your system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or Activate/Deactivate Notify:
= To activate (default)
= To deactivate
Initial state for Programming Mode.
0 7 4
*
#
*
#
0 7 5
*
#
*
#
0 7 6
*
#
*
#