Step by Step
Programming an Extension
62
Deactivating the Hotline Mode
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number (e.g., 12/102) for which you
want to remove a Hotline assignment.
The Hotline Mode is deactivated.
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
Warmline
Specify the length of time the extension should wait to
call the first number configured as a Hotline. Assuming
the timeout is 9 seconds, the call will be made 9
seconds after the handset is lifted. However, if during
the 9 second time interval a key is pressed on the
phone keypad, the call to the Hotline will be canceled.
Each extension can have a different timeout for activat-
ing a Hotline. This timeout may vary from 0 to 9
seconds.
By default, the Hotline activation timeout is "0 seconds".
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter the extension number (except 11/101, for
example, 12/102) for which you want to change the
timeout.
... Enter the length of time (0 to 9 seconds) for the Hotline
timeout.
Enter the next extension number
or
Press this key.
Initial state for Programming Mode.
4 5
*
#
6 2
0 9
#
To Next Page
Loading...
