Siemens HiPath 1130 - Activating Callback;Urgent Call with Timeout; Call Name;Number Display

Programming an Extension
45
Step by Step
Activating Callback/Urgent Call with
Timeout
When an extension or external number is busy, this
configuration allows you to set a timeout for activating
the Callback or Urgent Call features after approximately
7 seconds.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or Activate/Deactivate the features:
= To activate Callback and deactivate Urgent Call
= To deactivate Callback and activate Urgent Call
(default)
Initial state for Programming Mode.
Call Name/Number Display
This feature enables Caller ID information to be
displayed on an extension’s telephone display.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Select the information to be shown on the display:
= Name and number (default)
= Name only
= Number only
Initial state for Programming Mode.
0 3 7
*
#
*
#
0 3 9
1 3
1
2
3