Siemens HiPath 1130 - Associated Group; CD Port Assignment

Programming an Extension
63
Step by Step
Associated Group
With this feature you can assign many extensions to
one Executive telephone. There are 8 groups available
with 16 extensions for each group. A group is assigned
to each Executive telephone. To ensure proper opera-
tion all extensions must have system telephones
installed. An extension can be assigned to many groups
at the same time.
By default no Associated Groups are configured.
Required:Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter an extension for the executive telephone (e.g., 11/
101).
... Specify up to 15 extensions as associated telephones
(e.g., 12/102).
Press this key.
Initial state for Programming Mode.
Deleting an Associated Group
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
Enter an extension for the executive telephone (e.g., 11/
101).
The executive telephone extension is deactivated.
Press this key.
Initial state for Programming Mode.
CD Port Assignment
Assigning CD ports to extension slots allows system
telephones to be connected to the PABX.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Enter a number from 01 to 24 for the CD port.
5 1
#
5 1
*
#
4 6
0 1 2 4