Fax/DID Module
109
Step by Step
... or Select the next digit for Call Forwarding.
or
Press this key.
Initial state for Programming Mode.
To Remove an Option
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... or Select the Call Forwarding digit to be removed.
Wait 5 second to delete.
... or Select the Call Forwarding digit to be removed.
or
Press this key.
Initial state for Programming Mode.
Announcement Recording
The system provides a feature for recording announce-
ments for auto-answering, call transfers, and alarms.
The recording is done using the handset. We suggest
that you record your announcement in a quiet environ-
ment. You can check the recorded announcement by
playing it back.
You can record a different announcement for each mode
of operation.
To ensure proper operation record at least one greeting
announcement and one announcement for transferring
calls.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or Enter code "9" to "record new announcement" or "0" to
"play back announcement."
... Next, enter the code for selecting one of the following
announcements:
0 9
*
#
0 0 9
0 9
*
0 9
*
#
3 7
9 0
0 1 1 2
To Next Page
Loading...
