Siemens HiPath 1130 - MSN Answering for Fax;DID; Fax Extension for MSN

Step by Step
Fax/DID Module
114
MSN Answering for Fax/DID
This setting specifies a Fax/DID answering mode for
each MSN number.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Enter the slot (001... 140) for the MSN.
... Select an answering mode for MSN:
= Module is disabled (default)
= Fax
= DID
= Fax/DID
= Message (announcement)
= AutoFax
Enter next MSN
or
Press this key.
Initial state for Programming Mode.
Fax Extension for MSN
After detecting a fax signal, the Fax/DID module can
transfer a call to a Fax extension. The DID Mode does
not need to be configured for this feature.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
... Enter the slot (001... 140) for the MSN.
Enter the extension number for Fax Reception (e.g., 12/
102).
... Enter the next MSN slot
or
Press this key.
Initial state for Programming Mode.
0 8 0
0 1
0
4 01
0 5
0
1
2
3
4
5
#
0 8 1
0 1
0
4 01
0 1
0
4 01
#