Setup and Installation
169
4 TME1 Module
The TME1 module can only be installed in Slot 2 on the HiPath 1130 and in
Slot 3 on the HiPath 1150 (Æ page 163).
Warning: Do not touch the administration serial interface connector of the
TME1 module before disconnecting all analog extensions and trunk con-
nectors. Failure to follow this procedure may expose the user to dangerous
voltages. The TME1 module interconnecting cables and connectors should
only be handled by qualified technical personnel.
5 S
0
Module
The S
0
module can only be installed in Slot 2 on the HiPath 1130 and Slot
3 on the HiPath 1150 (Æ page 163).
To Next Page
Loading...
