Siemens SICAM RTU - External Circuitry

System Components
SICAM RTUs, SICAM AK 3 User Manual 115
DC2-028-2.03, Edition 07.2016
2.5.2.4 External Circuitry
Input with switched plus or minus
Note
The above figure shows one example of the assignment of inputs and/or outputs as well as their external
circuitry. Rules, which must be considered for the assignment of the inputs and/or outputs, can be found in
the following section.
double-point information D00/D01
double-point information D02/D03
A double-point information occupies
two binary inputs. The order is important::
V
V
V
V
V
V
Zn.Nr.: DI2100_EBE.WMF