Prepare Engineering
SICAM RTUs, SICAM AK 3 User Manual 173
DC2-028-2.03, Edition 07.2016
3.3 Integrated Protocol SNMPv3
For the Engineering oft he SNMPv3 Agent you need to get MIB files and a MIB browser.
3.3.1 Download of the SICAM RTUs MIB-Files
The MIB-files for SICAM AK 3 can be downloaded from the website
http://www.siemens.com/sicam.
Select > Home > Products, Systems & Solutions > Products for Substation Automation > Sub-
station Control Systems and Remote Terminal Units > SICAM AK 3.
Under SICAM AK 3 click on Downloads and open Manuals.
In the result list click on SICAM RTUs SNMP MIB File to start the download.
After the download you get the file SICAMRTUs_SNMP_MIB_V03.00.00.zip.
Save this file on the computer where the MIB-browser is installed.
Then open the file and start the therein contained file SICAMRTUs_SNMP_MIB_V03.00.00.exe
by means of double-click.
Now the SICAM CMIC MIB files will be stored automatically on your computer. The default
path is C:/siemens/SICAMRTUs_SNMB_MIB_V03.00.00/MIB-Files.
3.3.2 Import of the MIB-Files in MIB-Browser
The import of the MIB-files (C:/siemens/SICAMRTUS_SNMB_MIB_V03.00.00/MIB-
Files) into your MIB-browser must be done in following order:
1. Import of SIEMENS-SMI.mib
2. Import of sicamRTUs.mib
3. Import of RFC1213.mib (optional)
4. Import of rfc2790.mib (optional)
5. Import of rfc3635.mib (optional)
Beside a standard MIB-browser you can load the MIB-files also with following Siemens prod-
ucts:
To Next Page
Loading...
