Siemens SIMATIC HMI series User Manual

Parameterizing the Mobile Panel
5.8 General settings
Mobile Panels 2nd Generation
106 Operating Instructions, 09/2018, A5E33876626-AC
Procedure
Setting up password protection
1. Double-click on the "Password" icon.
The following dialog appears:
2. Enter the password in the "Password" text box.
Activate the numeric keyboard on the screen for this.
3. Repeat the password entry in the "Confirm password" text box.
4. Confirm the inputs.
The dialog and the screen keyboard close.
Security mode as described in the section
"Using the HMI device in password-protected security mode (Page 89)" is active.
Canceling password protection
1. Double-click on the "Password" icon.
The following dialog appears:
2. Enter the password in the "Password" text box.
The following dialog appears:
3. Delete the entry in the "Password" text box.
The entry in the "Confirm password" text box is deleted automatically.
4. Confirm the deletion.
The dialog and the screen keyboard close.
Security mode as described in the section
"Using the HMI device in password-protected security mode (Page 89
)" is
not
active.

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB