Siemens SIMATIC HMI series User Manual

Fail-safe operation
9.1 Connecting the connecting cable
Mobile Panels 2nd Generation
210 Operating Instructions, 09/2018, A5E33876626-AC
Connection to a connection box with the assigned operating mode "Stop button evaluated by
safety relay"
● Plug the connecting cable into a connection box.
The project starts as configured in the Control Panel. The project start screen appears
after startup.
The stop button is active and does not light up.
Connection to a connection box with the assigned operating mode "E-stop button evaluated
by safety relay"
● Plug the connecting cable into a connection box.
The project starts as configured in the Control Panel. The project start screen appears
after startup.
The emergency stop button is active and lights up.
Connection to a connection box with the assigned operating mode "E-stop button evaluated
by PROFIsafe"
● Plug the connecting cable into a connection box.
The project starts as configured in the Control Panel.
PROFIsafe communication is established.
The Mobile Panel is logged on automatically in the safety program.
The project start screen appears after startup.
The emergency stop button is active and lights up.
Response to errors
1. If an error occurs after you attach the connecting cable, a corresponding error message is
displayed.
2. Check the connecting cable and the plug-in connection on the connection box. Read the
message text and follow the instructions in the error message
You can find additional information on error scenarios in the following sections:
● Safety-related dialogs (Page 212)
● Troubleshooting (Page 267)
See also
Connecting the KTP Mobile connecting cable to the connection box (Page 73)
Entering and deleting a password (Page 105)

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB