Technical specifications
11.2 Certificates and approvals
Mobile Panels 2nd Generation
220 Operating Instructions, 09/2018, A5E33876626-AC
EU Declaration of Conformity
The EU Declaration of Conformity is available to the relevant authorities at the following
address:
Siemens AG
Digital Factory
Factory Automation
DF FA AS SYS
Postfach 1963
D-92209 Amberg, Germany
UL approval
Underwriters Laboratories Inc. in accordance with
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
IEC 61131
The HMI device meets the requirements and criteria according to IEC 61131-2,
Programmable Controllers, Part 2: Operating resource requirements and tests.
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of EN 61000-6-4 Generic standards – Emission
standard for industrial environments.
This product meets the requirements of the standard EN 61000-6-4 Generic standards –
Emission standard for industrial environments.
Identification for Eurasion Customs Union
● EAC (Eurasian Conformity)
● Customs union of Russia, Belarus and Kazakhstan
● Declaration of conformity according to Technical Regulations of the Customs Union
(TR CU)
Marking for Korea
This product meets the requirements of Korean certification (KC label).
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
This equipment is Industrial (Class A) electromagnetic wave suitability equipment and seller
or user should take notice of it, and this equipment is to be used in the places except for
home.
See also
Currently valid certificates on the Internet
(http://support.automation.siemens.com/WW/view/en/101936852/134200
)
To Next Page
Loading...
Need help?
General
