Siemens SIMATIC HMI TP1000F Mobile RO User Manual

Parameterizing the Mobile Panel
5.10 Server time
TP1000F Mobile RO
110 Operating Instructions, 08/2017, A5E39831415-AA
6. Enter the DNS name of the time server under "Name".
You can also enter the IP address of the time server.
7. Use the "Test" button to check the accessibility of the time server.
The communication connection to the time server is established and the time is displayed
in the "DateTime:" display field. The IP address of the time server is also displayed in the
"Address" display.
8. Up to three additional time servers can be set up, if needed.
9. Confirm your entries with "OK".
The communication connection to the time server is now set up and immediately active.

Siemens SIMATIC HMI TP1000F Mobile RO Specifications

General

Brand	Siemens
Model	SIMATIC HMI TP1000F Mobile RO
Category	Measuring Instruments
Language	English