TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
155
Certificates and approvals
Approvals
Note
The following overview shows the possible approvals for the HMI device and the connection
boxes. The only valid approvals for t
he HMI device and the connection boxes themselves
are those shown on the nameplate.
The Mobile Panel and the connection boxes satisfy the requirements and protection
objectives of the following EC directives. The Mobile Panel and the connection boxes comply
with the harmonized European standards that have been published in the Official Journals of
the European Community for programmable controllers:
● 2004/108/EC "Electromagnetic Compatibility Directive" (EMC Directive) until 19 April
2016
● 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive) as of 20 April 2016
● 2011/65/EU RoHS Directive
● The following also applies for fail-safe Mobile Panels: 2006/42/EC "Machinery Directive"
EC Declaration of Conformity
The EC Declaration of Conformity is available to the relevant authorities at the following
address:
Siemens AG
Digital Factory
Factory Automation
DF FA AS DH AMB
Postfach 1963
D-92209 Amberg
Underwriters Laboratories Inc. in accordance with
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
The HMI device meets the requirements and criteria according to IEC 61131-2,
Programmable Controllers, Part 2: Operating resource requirements and tests.
To Next Page
Loading...
Need help?
General
