Siemens SIMATIC HMI TP1000F Mobile RO User Manual

Parameterizing the Mobile Panel
5.7 General settings
TP1000F Mobile RO
88 Operating Instructions, 08/2017, A5E39831415-AA
5.7
General settings
5.7.1
Regional and language settings
The date, time and decimal points are displayed differently in different countries. You can
adapt the display format to meet the requirements of various regions.
Requirement
The Control Panel is open.
Procedure
1. Open the "Regional and Language Settings" dialog using the "Regional Settings" icon.
①
"Region" selection box
2. Select the required region in the selection box ①.
3. Navigate to the "Number", "Currency", "Time" and "Date" tabs one after the other.
4. Set the required regional settings in the selection field of these tabs.
5. Confirm your entries.
The dialog closes.
The country-specific specifications for the HMI device are now set. "Setting the date and time
(Page 89)" describes how to activate daylight saving time.

Siemens SIMATIC HMI TP1000F Mobile RO Specifications

General

Brand	Siemens
Model	SIMATIC HMI TP1000F Mobile RO
Category	Measuring Instruments
Language	English