Siemens SIMATIC HMI TP1000F Mobile RO - Connection Box Compact Connection Box Standard Connection Box Advanced; Connecting Cable; Connection Boxes

Technical specifications
9.7 Technical specifications
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
167
Protection against foreign objects and water
The device meets the requirements of IEC 60529.
Degree of protection
Explanation
IP65 all-round Applies to HMI device including connecting cable under the
following conditions:
• The terminal compartment cover is closed.
• The USB port is closed using a cover cap.
Type 4X/Type 12 (indoor use only)
Applies if indicated on the nameplate
Degree of pollution and overvoltage category
The device meets the following requirements according to IEC 61131-2:2007.
Degree of pollution
2
Overvoltage category
II
9.7.2
Connecting cable
Weight
You can find the information based on length on the Internet at:
SIMATIC HMI accessories
(https://mall.industry.siemens.com/mall/en/de/Catalog/Products/10030052) *
Bending radius,
minimum
≥ 4-times the outside diameter of the line
Rated condition,
temperature
0 to 55 °C
* To navigate directly to the information abou
t the connecting cable, enter the article number of the
connecting cable in the "Site Explorer" text box.
9.7.3
Connection boxes
Mechanics
Weight without
packaging
Connection box compact
Approx. 250 g
Connection box standard, connection box advanced Approx. 750 g