Safety instructions
2.1 General safety instructions
TP1000F Mobile RO
28 Operating Instructions, 08/2017, A5E39831415-AA
Always adhere to the safety provisions applicable in the country of use.
Strong high-frequency radiation
Observe immunity to RF radiation
The device has an increased immunity to RF radiation according to the specifications on
electromagnetic compatibility in the technical specifications.
Radiation exposure in excees of the specified immunity limits can impair device functions,
result in malfunctions and therefore injuries or damages.
Read the information on immunity to RF radiation in the technical specifications.
A device with electronic components is an electrostatic sensitive device. Due to their design,
electronic components are sensitive to overvoltage and thus to the discharge of static
electricity. Note the applicable regulations for ESD.
If the HMI device is to be used for manual movements in setup mode and the enabling
button is not active, there is a serious risk for the operating personnel.
For a project used to set up a plant, make sure that each movement requires the operation
of the enabling button. Only allow movements with the enabling button and at a reduced
speed.
A strong shock or impact can impair the proper functioning of the Mobile Panel.
After any mechanical shock or impact, check that the Mobile Panel and the safety-related
parts are in working order.
Note
The emergency stop / stop button can be triggered unintentionally when the HMI device is
dropped. This can result in an uninte
nded shutdown of the plant.
To Next Page
Loading...
Need help?
General
