Siemens SIMATIC HMI TP1000F Mobile RO User Manual

Using a client
6.4 Changing the server
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
141
6.4
Changing the server
Requirements
● The HMI device is connected as a client to a server.
Procedure
Proceed as follows:
1. Press the touch screen until the RemoteOperate toolbar is displayed.
If you have operator authorization you can, as an alternative, click the traffic lights.
Note
Setting the time to display the toolbar
The length of time you need to press the touch screen before the RemoteOperate toolbar
is displayed is defined in the "roServer.ini" file.
2. Close the connection to the server using the button.
The server selection list is displayed:
3. Connect to a different server. Follow the instructions in the "Connecting a client" section.
Result
You have connected to a different server.
See also
Connect client (Page 135)

Siemens SIMATIC HMI TP1000F Mobile RO Specifications

General

Brand	Siemens
Model	SIMATIC HMI TP1000F Mobile RO
Category	Measuring Instruments
Language	English