Siemens SIMATIC HMI TP1000F Mobile RO User Manual

Installing system components
3.6 Connecting the connection box
TP1000F Mobile RO
58 Operating Instructions, 08/2017, A5E39831415-AA
4. Connect the cables. Depending on the connection box, observe the pin assignment of
interface X10:
– Connection box standard and connection box advanced (Page 179)
– Connection box compact (Page 176)
5. For connection box standard and connection box advanced:
When all the required work has been completed in the connection box, close it.
See also
General safety instructions (Page 25)
Immunity to interferences (Page 159)
3.6.6
Connecting Ethernet to the connection box
The following devices can be connected to a connection box via PROFINET:
● A PLC
The possible PLCs are listed in "SIMATIC PROFINET system description
(https://support.industry.siemens.com/cs/us/en/view/19292127
)".
● An Ethernet device
Note
•
Only use a switch or comparable device to connect the connection box to public Ethernet
networks.
•
Follow the information in the "SIMATIC PROFINET system description
(
https://support.industry.siemens.com/cs/us/en/view/19292127)" manual for setting up a
PROFINET network.

Siemens SIMATIC HMI TP1000F Mobile RO Specifications

General

Brand	Siemens
Model	SIMATIC HMI TP1000F Mobile RO
Category	Measuring Instruments
Language	English