Parameterizing the Mobile Panel
5.13 Functions for service and commissioning
TP1000F Mobile RO
126 Operating Instructions, 08/2017, A5E39831415-AA
9. To restore the delivery state of the HMI device and set all device parameters to their
default values, enable "Reset to factory settings".
10. In the "Start Center" of the HMI device, click on the "Transfer" button.
11. On the PC in ProSave, click on the "Update OS" button.
Follow the instructions in ProSave.
The operating system on the HMI device is updated. A status display shows the progress.
A message is displayed when the operating system update is successfully completed.
You have successfully installed the operating system and the RemoteOperate Client
application on the HMI device.
Note
After restoring, a recalibration of the touch
screen may be required.
Backing up and restoring data (ProSave) (Page 123)
To Next Page
Loading...
