Glossary
TP1000F Mobile RO
188 Operating Instructions, 08/2017, A5E39831415-AA
Within the framework of Totally Integrated Automation, PROFINET represents the
systematic further development of the following bus systems:
● PROFIBUS DP as well-established fieldbus
● Industrial Ethernet as the communications bus for the cell level
The experience gained from both systems has been and continues to be integrated in
PROFINET. PROFINET is an Ethernet-based automation standard from PROFIBUS
International and defines a vendor-neutral communication and engineering model.
Recurring test for detecting hidden dangerous failures in a safety-related system so that a
repair, if needed, can restore the system to an "as new" condition or as close to this
condition as is practically possible.
Ethernet for isochronous cycle times of < 1 ms, for example, to meet the high real-time
requirements of drive technology.
Using RemoteOperate you can monitor or operate a server from a client. The range of
operations covers all the functions of the server.
STEP 7 is the programming software for SIMATIC S7, SIMATIC C7 and SIMATIC WinAC
PLCs.
General term referring to machines, processing centers, systems and processes which are
operated and monitored on an HMI device.
Telnet is the name of a network protocol widely used on the Internet. The client-server
protocol is based on character-based data exchange over a TCP connection. Programs that
implement the function of the terminal device are also frequently called Telnet.
Transfer is the transfer of an image from a PC to the HMI device.
To Next Page
Loading...
Need help?
General
