6.2.5 Safely remove the memory card with Startdrive
Function description
NOTICE
Data loss from improper handling of the memory card
If you remove the memory card when the converter is switched on without implementing the
"safe removal" function you may destroy the le system on the memory card. The data on the
memory card are lost. The memory card will only function again after formatting.
• Only remove the memory card using the "safe removal" function.
Procedure
1. In the Drive Navigator select the following screen form:
2. Click on the button to safely remove the memory card.
Startdrive will tell you whether you can remove the memory card from the converter.
You have now safely removed the memory card from the converter.
❒
Uploading the converter settings
6.2 Uploading to the memory card
Distributed converter for SIMOGEAR geared motors
142 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
