Siemens SINAMICS G110M - 8.5 Controlling clockwise and counter-clockwise rotation via digital inputs

8.5 Controlling clockwise and counter-clockwise rotation via digital
inputs
Overview
The converter o󹪜ers various methods to start and stop the motor and reverse its direction.
Two-wire control, ON/reverse
212))
5HYHUVLQJ
&ORFNZLVH&RXQWHU
FORFNZLVH
6WRS6WRS
W
W
67236723
ON/OFF1:
Switches the motor on or o󹪜
Reversing:
Reverses the motor direction of rota‐
tion
Two-wire control, clockwise/coun‐
terclockwise rotation 1 and clock‐
wise/counterclockwise rotation 2
212))
FORFNZLVHURWDWLRQ
212))
FRXQWHU
FORFNZLVHURWDWLRQ
&ORFNZLVH&RXQWHU
FORFNZLVH
6WRS6WRS
W
W
67236723
ON/OFF1 clockwise rotation:
Switches the motor on or o󹪜, clock‐
wise rotation
ON/OFF1 counter-clockwise rotation:
Switches the motor on or o󹪜, counter-
clockwise rotation
Three-wire control, enable/clock‐
wise/counterclockwise rotation
21FORFNZLVH
URWDWLRQ
(QDEOH2))
21FRXQWHU
FORFNZLVHURWDWLRQ
&ORFNZLVH&RXQWHU
FORFNZLVH
6WRS6WRS
W
W
W
67236723
Enable/OFF1:
Enables the motor to be switched on or
switched o󹪜
ON clockwise rotation:
Switches on the motor, clockwise rota‐
tion
ON counter-clockwise rotation:
Switches on the motor, counter-clock‐
wise rotation
Advanced commissioning
8.5 Controlling clockwise and counter-clockwise rotation via digital inputs
Distributed converter for SIMOGEAR geared motors
170 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL