6.3 Upload to a PC using Startdrive
Overview
You can backup the converter settings to a PC.
Requirement
The following preconditions apply:
• The converter power supply has been switched on.
• The PC and converter are connected with one another via a USB cable or via the eldbus.
Function description
Procedure
1. Go online.
2. Select "Online" > "Upload device to PG/PC."
3. Back up the project with "Project" > "Save."
4. Wait until Startdrive signals that data backup has been completed.
5. Go oine.
You have backed up the settings.
❒
Uploading the converter settings
6.3 Upload to a PC using Startdrive
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 143
To Next Page
Loading...
