Changes in this manual
Essential changes with respect to Edition 04/2018
New functions
Overview of all new and modied functions in rmware V4.7 SP13:
Firmware version 4.7 SP13 (Page 397)
Revised chapters
• Motor overload protection in accordance with IEC/UL 61800-5-1
How do I achieve a motor overload protection in accordance with IEC/UL 61800-5-1?
(Page 327)
• Replacing the converter
Uploading the converter settings (Page 137)
Replacing the Control Module (Page 365)
Downloading the converter settings (Page 367)
Replacing the Power Module (Page 377)
• Acceptance of the safety functions
The acceptance of the safety function "Safe Torque O" is no longer described in the manual.
Instead, we recommend that you use the corresponding wizard in the "Startdrive Advanced"
commissioning tool.
Acceptance test (Page 256)
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL 3
To Next Page
Loading...
