8.24 Motor protection by calculating the temperature
Overview
The converter calculates the motor temperature based on a thermal motor model. After
commissioning, the converter sets the thermal motor type to match the motor.
The thermal motor model responds far faster to temperature increases than a temperature
sensor.
If the thermal motor model is used together with a temperature sensor, e.g. a Pt1000, then the
converter corrects the model according to the measured temperature.
Function description
Thermal motor model 2 for induction motors
The thermal motor model 2 for induction motors is a thermal 3-mass model, consisting of stator
core, stator winding and rotor. Thermal motor model 2 calculates the temperatures - both in the
rotor as well as in the stator winding.
ุ
W
˽
˽U
SSS
SS!
S
$
)
U
L
U
Figure 8-72 Thermal motor model 2 for induction motors
Parameter
Table 8-73 Thermal motor model 2 for induction motors
Number Name Factory setting
r0034 CO: Thermal motor load - %
r0068[0 … 1] CO: Absolute actual current value - Arms
p0344[M] Motor weight (for thermal motor model) 0 kg
p0604[M] Mot_temp_mod 2/KTY alarm threshold 130 °C
p0605[M] Mot_temp_mod 1/2/sensor threshold and temperature value 145 °C
p0610[M] Motor overtemperature response 12
p0612[M] Mot_temp_mod activation 0000 0010 0000
0010 bin
p0625[M] Motor ambient temperature during commissioning 20 °C
p0627[M] Motor overtemperature, stator winding 80 K
r0632[M] Mot_temp_mod stator winding temperature - °C
p0640[D] Current limit 0 Arms
Advanced commissioning
8.24 Motor protection by calculating the temperature
Distributed converter for SIMOGEAR geared motors
326 Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
To Next Page
Loading...
